Low SAPS E7 – 10w40

Low SAPS (Sulphated Ash, Phosphorous and Sulphur) E7 10w40 is a semi-synthetic extreme performance heavy duty diesel engine oil. It meets and complies with the demanding requirements of Euro 4 and Euro 5 exhaust emission legislation.

Low SAPS E7 10w40 assures peak performance at the quality criterions, wear protection and friction reduction, detergency & dispersancy, corrosion prevention, viscosity temperature dependency, thermal oxidative stability, low evaporation tendency, good elastomer compatibility and few environmental impacts.
Low SAPS E7 10w40 ensures the Euro 4 and Euro 5 turbo charged diesel engines extremely extended drain intervals, excellent motor cleanliness, very good cold starting and warm-up performance even at the lowest temperatures, outstanding aging resistance, reliable lubrication under all operation conditions and reduced pollution of noxious matter caused by the lubricant.


Low SAPS E7 meets or exceeds the following specifications:

  • ACEA E4-99 / E6 / E7-04
  • MAN M 3477, M 3277 CRT
  • MB 228.51
  • MTU Type 3.1
  • Renault Truck RXD
  • Volvo VDS-3, VDS-2
  • *SCANIA LA (Long Drain, Low Ash)
  • *DAF 100,000km drain specification (Long Drain)

*This product is OEM Approved and manufactured by BRB International


  • Semi-Synthetic Formulation
  • Suitable for use where particulate filters are used
  • Excellent soot and sludge control resulting in cleaner engines
  • Reduces fuel consumption due to superior technology
  • Outstanding low temperature viscometrics for reduced wear at start up
  • Low SAPS (Sulphated Ash, Phosphorus, Sulphur)


200 Litre, 20 Litre drums

Density at 15°C, kg/m3 0.859
Kinematic viscosity at 40°C, mm2/s (cSt) 88.5
Kinematic viscosity at 100°C, mm2/s (cSt) 13.4
Viscosity index 156
Flash Point°C 240
Pour Point °C -30
TBN, mgKOH/g 8.2
Sulphated ash % 0.99
Sulphur % 0.21
Phosphorus % 0.07

NOTE: Due to continual product research and development, the information contained herein is subject to change without notice.

Values stated are average values only, and may vary due to manufacturing tolerances.