HVI ISO 32, 46, 68, 100, 150

MASTERLUBE HVI HYDRAULIC OIL is a premium anti-wear hydraulic oil made with high-viscosity index improvers and rust, oxidation, foam inhibitors and zinc anti-wear additives. HVI HYDRAULIC OIL also promotes excellent cleanliness, long fluid life, demulsibility and filterability even when badly water contaminated.

PROPERTIES MASTERLUBE has an extended charge life due to the superior quality chemical and thermal stability additive components in the finished oil. The zinc additive system ensure ultra fine filters and close tolerance spool valves are kept operational. Excellent air release properties minimise compressibility and prevent noisy and erratic operation.

APPLICATIONS MASTERLUBE is for use in hydraulic systems requiring stable viscosity oils, particularly systems with vane pumps operating at pump pressure above 7MPa (1000 psi) and speeds above 1200 rpm. Also for use in other systems where operational temperatures vary such as with outdoor or mobile equipment or wear rates are high with conventional oils.

MASTERLUBE HVI HYDRAULIC OIL meets or exceeds the requirements of:

  • Denison HF-O, HF-1, HF-2
  • Sperry Vickers I-286-S
  • US Steel 126, 127
  • DIN 51524, part 1 (HL), part 2 (HLP), part 3 (HVLP)
  • AFNOR NF E 48-603 (HL, HM, HV)
  • SIS SS 155434
  • VDMA 24318
  • Hoesch HWN 2333
  • Thyssen TH N-256132
  • CETOP RP 91 H (HM, HV)
  • SEB 181 222
  • Denison Filterability TP 02100

STANDARD PACKAGING

200 Litre, 20 Litre drums

TYPICAL CHARACTERISTICS

CHARACTERISTICS HVI HYDRAULIC OIL

HVI ISO GRADE 32 46 68 100 150
FZG Stages Passed 12 12 12 12 12
Density at 15°C 0.87 0.87 0.88 0.89 0.90
Flash Point, COC, °C (min.) 208 215 220 230 230
Pour Point, °C -39 -39 -36 -36 -36
Kinematic Viscosity at 100°C (cSt) 6.5 8.4 8.4 15.6 17.3
Kinematic Viscosity at 40°C (cSt) 32.3 46 67.5 100.8 148
Viscosity Index 150 150 135 125 120

NOTE: Due to continual product research and development, the information contained herein is subject to change without notice.Values stated are average values only, and may vary due to manufacturing tolerances.