Masterlube 1030 – 10w/30 SM/CF
| The current trend among engine manufacturers is to achieve improved fuel consumption, lower exhaust emissions and higher specific horsepower; but also to have smaller sump capacity and extended oil change intervals. Engines run hotter due to reduced cooling capacity and increased use of accessories such as air-conditioning. Lubricants intended for these demanding conditions must continue to keep components clean, free from gum/varnish and be sludge free even at the end of their service.MASTERLUBE 1030 10W/30 SM/CF has been formulated with the latest additive technology and choice of basestocks to meet these criteria and give protection to all vital engine and engine/transmission components.
|
|
| APPLICATION MASTERLUBE 1030 10W/30 SM/CF motor oil is suitable for most multi-valve and finetolerance engine/transmission combinations where an oil of this viscosity grade is specified. It contains no friction modifiers and is suitable in wet-clutch applications. Vehicles operating under low temperature conditions will also benefit from MASTERLUBE 1030 ability to be pumped quickly to all moving parts when the engine is first started. |
|
| SPECIFICATION MASTERLUBE 1030 10W/30 SM/CF meets or exceeds the following specifications.API SL/CF ACEA A2-98
|
|
| STANDARD PACKAGING 200 litre @ 20drums |
|
| PROPERTIES MASTERLUBE 1030 10W/30 SM/CF conforms to the high standards required to achieve long engine life and less maintenance without sacrificing fuel consumption. It maintains excellent engine cleanliness assisting engine management pollution control systems. |
|
| TYPICAL CHARACTERISTICS CHARACTERISTICS – MASTERLUBE 1030 10W/30 | |
| Kinematic viscosity at 40°C, mm /s (cSt) | 70 |
| Kinematic viscosity at 100°C, mm /s (cSt) | 11 |
| Density at 15°C | 0.87 |
| Viscosity index | 145 |
| Flash Point, °C (min.) | 210 |
| RECOMMENDED USES Suitable for all Petrol, Diesel and LPG engined vehicles manufactured from 2001 specifying a 10W/30 grade engine oil. |
|
| Note: Due to continual product research and development, the information contained herein is subject to change without notice.Values stated are average values only, and may vary due to manufacturing tolerances. | |