S1 5w30, 5w40 Full Synthetic

S1 5w30, 5w40 is a full synthetic petrol/diesel maximum performance motor oil which provides the highest level of protection from combustion deposits, heat induced oil oxidation and sludge deposits.

S1 5w30, 5w40 is a low friction oil of the new “Low SAPS” era. This oil suits passenger car engines with next generation exhaust after treatment devices such as catalytic converters, diesel particulate filters (DPF) as well as today’s devices.

APPLICATION 

S1 5w30, 5w40 motor oil is suitable for all late model passenger cars especially those fitted with turbo chargers. Ideal for use in LPG fuelled vehicles and diesel engines where API CF performance is stipulated.

Some of the benefits are low sulphur, phosphorous and ash content reduces poisoning of catalysators in gasoline engines and decreases the build-up of particles in the diesel particulate filter (DPF) and thus assists environmental protection by lowering pollution. This especially reduces CO2 emissions.

Unique formulation assured outstanding wear protection and maximum engine cleanliness as well as reduces gumming on throttles and valves, supports the optimal operation of the engine.

Best low temperature properties means rapid oil circulation at cold-starting of the engine which particularly contributes to a longer operating life of the engine

SPECIFICATION

S1 5w30, 5w40 meets or exceeds the following specifications:

  • API SM/CF
  • ACEA C3-04
  • ACEA A3 B4-04
  • BMW Longlife 04
  • MB 229.51
  • Porsche
  • VW 502.00, 505.00, 505.01

PACKAGING

200 Litre, 20 Litre drums

TYPICAL MAIN CHARACTERISTICS

CHARACTERISTICS S1 5w30, 5w40 Full Synthetic

S1 5w30

S1 5w40

Density at 15°C, kg/m3

0.853

0.851

Kinematic viscosity at 40°C, mm²/s (cSt)

75.2

68.9

Kinematic viscosity at 100°C, mm²/s (cSt)

13

11.7

Pour Point °C

-36

-39

Flash Point °C

>230

>230

Viscosity Index

175

166

Phosphorous Maximum %

0.10

0.10

TBN, mgKOH/g

7.3

7.3

CCS at 30°C (mPa.s)

6060

6180

NOTE: Due to continual product research and development, the information contained herein is subject to formulation change without notice.

Values stated are average values only and may vary due to manufacturing tolerances.